United Nations Directories
for Electronic Data Interchange for
Administration, Commerce and Transport



 UN/EDIFACT

Message Type : CONRPW Version : D Release : 16B Contr. Agency: UN Revision : 1 Date : 2016-10-28 SOURCE: TBG6 Architecture, Engineering and Construction CONTENTS Response of pending works message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table --------------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction --------------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Response of pending works message (CONRPW) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE The construction industry uses this message during its design, building and maintenance stages. It communicates with organisations about existing and planned services in the vicinity of the works. 1.1 Functional definition This message is a reply to a CONAPW message and enables service providers to respond to a contractor giving details of any services and networks in the location where construction work is to be undertaken. 1.2 Field of application The Response of pending works message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. The parties involved in such transfers belong to various industry sectors : - the construction industry : contractors are the recipients of the message. - gas, electricity, ... and more generally network distributors who are among the senders of such messages, and who will process them to advise contractors of the presence of existing networks. - public authorities, which may be - clients or designers of projects - in charge of specific responsibilities eventually affected by the projects. - in some cases, this type of response on a formal advice may have a legal status, the consequence of it may be the liability of the sender or receiver. Some insurance companies also may be concerned by this message. 1.3 Principles This is only one of a group of messages being designed for this flow among construction industry. Many aspects have to be considered, they are described in the following paragraphs. This message is the response to a prior request of information, which has eventually been sent through another appropriate EDI message. The type of the information to convey in the "flow" CONRPW is not only alphanumeric, but some geographical and graphical information may be conveyed in conjunction with the response itself, in order that the recipient gets all the relevant elements on the existing networks. There is another appropriate EDI message being designed to convey information on plans and drawing organization, and it has been decided not to put this information in the message CONRPW itself, but to give an opportunity to link CONRPW with the drawing organization message. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 00010 UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Response of pending works message is CONRPW. Note: Response of pending works messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 CONRPW 0052 D 0054 16B 0051 UN 00020 BGM, Beginning of message A segment for unique identification of the Response on pending works number and type of document. 00030 RFF, Reference A segment to give prior references of the whole document, for example, project number or contract number, and authorization references if required, and the reference to the prior Advice on Pending Works. 00040 DTM, Date/time/period A segment specifying the dates that apply, e.g. forecasted date to start works, duration of the project and/or forecasted date of end of the works. 00050 Segment group 1: NAD-SG2 A group of segments identifying names, addresses and contacts relevant to the response. 00060 NAD, Name and address A segment identifying names and addresses and their function relevant for the whole response on pending works. In the construction industry parties involved are e.g. the contractor, the designer, the client. 00070 Segment group 2: CTA-COM A group of segments giving contact details of the specific person or department within the party identified in the NAD segment. 00080 CTA, Contact information A segment giving additional contact information relating to the party specified in the NAD segment, e.g. contact name, department or function. 00090 COM, Communication contact A segment to identify a communication number of the previous information given in CTA (phone, fax, telex, etc.). 00100 LOC, Place/location identification A segment which enables the sender to specify, in some occurrences, the location of the project and of existing networks. 00110 FTX, Free text A segment to specify some special indications on the nature of the networks, in coded and/or clear form, that is not possible to indicate in the LOC segment. 00120 DOC, Document/message details A segment to specify which other documents (drawing organization, circulation list, plans, etc.) are to be processed in conjunction with CONAPW, and what is the communication channel used to transfer them. 00130 CNT, Control total A segment providing a control total, for example, the number of documents attached to CONAPW. 00140 AUT, Authentication result A segment to provide an authentication of the message. 00150 UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) AUT Authentication result BGM Beginning of message CNT Control total COM Communication contact CTA Contact information DOC Document/message details DTM Date/time/period FTX Free text LOC Place/location identification NAD Name and address RFF Reference UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R 00010 UNH Message header M 1 00020 BGM Beginning of message M 1 00030 RFF Reference M 9 00040 DTM Date/time/period M 9 00050 ---- Segment group 1 ------------------ M 3----------------+ 00060 NAD Name and address M 1 | | 00070 ---- Segment group 2 ------------------ C 2---------------+| 00080 CTA Contact information M 1 || 00090 COM Communication contact C 3---------------++ 00100 LOC Place/location identification M 99 00110 FTX Free text M 99 00120 DOC Document/message details C 9 00130 CNT Control total C 5 00140 AUT Authentication result C 1 00150 UNT Message trailer M 1

Copyright United Nations, all rights reserved
 
UN Economic Commission for Europe
Palais des Nations, CH-1211 Geneva 10, Switzerland
Tel: +41-22 917 1366 Fax: +41-22 917 0037 E-mail: [email protected]
 
UN/EDIFACT Directories